10-25 °C 66 L/Min., 180 L Recirculating Chiller

$12,990.00

Description

Model WAC-10
Controller Digital micro-chip controlled with LCD screen and fluid level display
Input power 480 VAC 60 Hz three-phase (3PH)
Nominal cooling capacity Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 12 °C
Outlet chilled fluid temperature: 7 °C
Inlet cooling air temperature: 30 °C
Outlet cooling air temperature: 35 °C
Water pump 480VAC 60 Hz three-phase (3 PH) 750 W
3450 RPM
Max pressure 10 bar.
Max liquid temperature: 70 °C
Pumping speed: 66 L/min.
Reservoir capacity 180 L
Recommended coolant Distilled water
Compressor 460 VAC 60 Hz three-phase (3PH) 10P
Thermally protected. PS: 22.6 bar
TS max: 50 °C, TS min: -35 °C
Lubricant: P.O.E. 160 PZ
Refrigerant: R407C-R134a-R404A-R507
Temperature accuracy  +/- 2 °C
Condenser cooling air flow 212,000 ft³/hour
Chilled fluid flow 3785 L/hour
Inlet & outlet diameter 1″ (four inlets and four outlets)
Unit/shipping weight 540 / 670 lbs.
Unit/shipping dimensions 50 × 28 × 60″ / 55 × 35 × 70″ (D × W × H)
Safety Over current, compressor delay start, water pump
over load, built-in fuse, over-voltage and under-
voltage, abnormal operations, phase protection and
Working environment Temperature range of chilled fluid: 5-35 °C.
Temperature difference of chilled fluid between inlet and outlet: 3-8 °C.
It is better to use the chiller at an ambient temperature of or below 35 °C.
Recommended to use with
these induction heaters
(result may vary on
different applications)
High frequency 30 kW, 40 kW, 60 kW
Mid frequency 35 kW, 45 kW, 70 kW
Low frequency 35 kW, 45 kW, 70 kW
 CE compliant  Yes

Additional information

Weight 670 lbs
Dimensions 55 x 35 x 70 in